Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking a leader to join us as a Lead Designer, Piping and Instrumentation Diagram. This position will report to the Manager, Piping and Instrumentation Diagram.

This position is located in Downtown Houston. Work schedule is Monday - Friday in office.

The Lead Designer, Piping and Instrumentation Diagram is responsible for interpreting and creating Piping and Instrumentation Diagrams (P&IDs), which are detailed engineering drawings that visually represent the layout of a process system, including piping, equipment, and instrumentation within an industrial facility; essentially, they are experts in understanding the intricate details and symbols used on P&IDs, allowing them to analyze process flow, identify potential issues, and ensure accurate design and operation of the system.

Responsibilities:

Understanding of and ability to work with process engineering:

Strong grasp of block flow, process flow, material selection diagrams, as well as the different types of equipment used in various industries.
Strong understanding of project/CAD life cycles and workflows.
Ability to clearly comminute via phone, email, and in meetings.

Proficient in P&ID symbols and standards:

Accurately interpret and utilize the standardized PIP symbols used on P&IDs, including those related to valves, pumps, instruments, and safety devices.

Experience in design and review:

Review P&IDs for accuracy, consistency, and compliance with engineering standards, identifying potential design flaws or safety concerns.
Experience running P&ID Teams of four users or more with High Value Centers.

Knowledge of relevant software:

Experience with the P&ID design software is required.

7+ years of experience SmartPlant P&ID
2+ years of experience with AutoCAD/MicroStation

Roles where a P&ID Lead Designer might be involved:

Project engineering teams:

Contribute to the development and review of P&IDs during all phases of a project.
Understanding of Pre-FEED, FEED, Detail Design, and EPC aspects of Capital Projects.

Operations and maintenance teams:

Analyze P&IDs to troubleshoot issues, plan maintenance activities, and understand system modifications.
Understanding of the needs of Plant Operations and Owner P&ID use and functionality.

Quality assurance teams:

Ensure compliance with regulatory standards and internal procedures related to P&ID documentation.
High understanding of the Database over picture needs, as well as the ability to do project wide picture and data audits.

Training and development:

Provide training to engineers and technicians on how to read and interpret P&IDs effectively.
Mentor other team members when assigned to your projects, or if they ask for help.

Qualifications:

Associate degree in science/art or relative field
3 or more years of experience as a SPPID Project Drafting Lead
Experience as a CAD Lead Designer preferred
Good knowledge of P&ID design software like SmartPlant P&ID or AutoCAD
PID/PFD/MSD/BFD drafting experience required
Able to commute to Downton Houston office Monday - Friday

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

Apply for this Job

* Required

First Name *

Last Name *

Email *

Phone *

Resume/CV *

Dropbox Google Drive

(File types: pdf, doc, docx, txt, rtf)

Cover Letter

Dropbox Google Drive

(File types: pdf, doc, docx, txt, rtf)

Are you related to any employee of Venture Global LNG or its subsidiaries? *

Are you related to any person assigned to a Venture Global LNG construction project through a major contractor or supplier to Venture Global LNG? *

Will you now or in the future require sponsorship to work in the United States? *

How did you find out about this job? *

Have you ever been convicted of a felony? *

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Venture Global LNG’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Gender

Are you Hispanic/Latino?

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Veteran Status

Voluntary Self-Identification of Disability

Form CC-305

Page 1 of 1

OMB Control Number 1250-0005

Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

Alcohol or other substance use disorder (not currently using drugs illegally)
Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
Blind or low vision
Cancer (past or present)
Cardiovascular or heart disease
Celiac disease
Cerebral palsy
Deaf or serious difficulty hearing
Diabetes
Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
Epilepsy or other seizure disorder
Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
Intellectual or developmental disability
Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
Missing limbs or partially missing limbs
Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
Partial or complete paralysis (any cause)
Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
Short stature (dwarfism)
Traumatic brain injury

Disability Status

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Enter the verification code sent to to confirm you are not a robot, then submit your application.

Security Code *

This application was flagged as potential bot traffic. To resubmit your application, turn off any VPNs, clear the browser's cache and cookies, or try another browser. If you still can't submit it, contact our support team through the help center.