Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Lead Process Engineer. 

Responsibilities 

  • Manage process engineering services that meet applicable statutory and regulatory specifications, on time and within budget.
  • Manage process engineering project requirements.
  • Manage process engineering services such as: 
    • participate in relevant meetings, prepare progress reports, and comply with required checking procedures.
    • ensure the project scope is clear and that changes comply with project change management processes.
    • provide advice during procurement, construction, and commissioning activities.  For example, oversee requisitions, technical bid evaluations and purchase order preparation.
  • Act as the process engineering Lead on LNG projects.
  • Proactively resolve any discrepancies between the various interfaces on projects.
  • Keep up to date with the latest developments and technical innovations in process engineering.
  • If required, assist, and support junior personnel within the process engineering team.
  • Communicate effectively with the process engineering team and project stakeholders, including the Customer.
  • Identify issues and problems, develop appropriate solutions, and ask for assistance when required.
  • Generation, review, and approval of the Process deliverables: H&MB, PFD’s, P&IDs, equipment specifications, line sizing calculations, relief and blowdown calculations and analyses, contingency analysis & process instrument data in their assigned area.
  • Development of design basis and process design criteria 
  • Perform process modeling using industry recognized software such as Aspen HYSYS and Unisim Design
  • Perform process studies for troubleshooting of operational issues related to natural gas processing and liquefaction 
  • Equipment sizing calculations and specifications for bulk separation vessels, heat exchangers, pumps, compressors, control valves and PSV’s
  • Conducting Process studies for production improvement and debottlenecking.
  • Mentoring junior Process Engineers.
  • Reviewing requisitions, technical bid evaluations and providing support to other disciplines.
  • Maintain Management of Change (MoC) logs for assigned projects. Seek and obtain Project approval for design changes and document decisions and actions taken.
  • Participate in risk reviews, SIMOPs, HAZIDs, HAZOPs etc.
  • Review and comment inter-disciplinary deliverables such as piping layouts, isometrics, 3D models, mechanical equipment specifications, etc.
  • Provide assistance and advice during procurement, construction and commissioning activities.
  • Willingness to travel to remote project site locations as required.

Qualifications: 

  • Bachelor’s degree in Chemical and/or Process engineering.
  • Experience in projects and brownfield modifications from concept through execution, commissioning, and start-up
  • Excellent knowledge of the fundamental requirements of the process engineering, and the basic requirements of other engineering fields.
  • Excellent knowledge of applicable local and international standards and statutory and regulatory specifications related to LNG.
  • Competent use of relevant software such as MS Office Suite and process engineering specific software.

Technical and Industry Experience  

  • Excellent technical and practical engineering skills and ability to consistently deliver quality, accurate and timely work to satisfy the project requirements.
  • LNG and gas processing experience.
  • Extensive technical and practical experience in process engineering in the same or similar industry including experience in working in multi-disciplinary projects and teams.

 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

#LI-Onsite

 

 

 

 

#LI-Onsite

 

Apply for this Job

* Required
resume chosen  
Dropbox Google Drive
(File types: pdf, doc, docx, txt, rtf)
Cancel
cover_letter chosen  
Dropbox Google Drive
(File types: pdf, doc, docx, txt, rtf)
Cancel
When autocomplete results are available use up and down arrows to review
+ Add another education

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Venture Global LNG’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Enter the verification code sent to to confirm you are not a robot, then submit your application.

This application was flagged as potential bot traffic. To resubmit your application, turn off any VPNs, clear the browser's cache and cookies, or try another browser. If you still can't submit it, contact our support team through the help center.