Venture Global LNG (“Venture Global”) is a long-term, low-cost provider of American-produced liquefied natural gas. The company’s two Louisiana-based export projects service the global demand for North American natural gas and support the long-term development of clean and reliable North American energy supplies. Using reliable, proven technology in an innovative plant design configuration, Venture Global’s modular, mid-scale plant design will replace traditional designs as it allows for the same efficiency and operational reliability at significantly lower capital cost.

We are seeking qualified applicants for the position of Maintenance Analyzer Technician.

Location: Plaquemines Parish/Belle Chasse - Point of Reference: 19000 LA-23, Pointe Celeste, 70083

General Description:

The Maintenance Analyzer Technician reports to the Maintenance Controls Supervisor and performs the safe, efficient and effective execution of all Analyzer  maintenance work at Venture Global Plaquemines Liquefied Natural Gas (PLNG) facility. The Maintenance Analyzer Technician is responsible for working with other Technicians, and Supervisors within the Operations & Maintenance departments.

Responsibilities:

  1. Executes preventive and corrective maintenance work in a wide variety of Analyzers according to PLNG HSSE process, procedures, standards and regulations.
  2. Adherence to VGIMS (Venture Global Integrity Management System), PLNG Maintenance Manual and Work Management process and procedures.
  3. Identify potential safety, health, environmental work hazards. Understand maintenance work scope and applicable Operation and Maintenance processes and procedures.
  4. Performs problem solving activities in order to ensure maintenance and reliability corrective measures are implemented. Functions as Maintenance SME (Subject Matter Expert) for Analyzer
  5. Prepare and create required Job Safety Hazard Analysis and Work permits under his/her area of responsibility (ePTW as applicable). Ensure permits are prepared and submitted to Operations well in advance before execution.
  6. Works along with Operations, Maintenance and Engineering counterparts to ensure the safe completion of maintenance work.
  7. Responsible for daily work compliance and progress reports according to maintenance work execution processes and procedures.
  8. Manage personal time card according to PLNG Policies and Procedures (Vacations, time-off, Sick leave, training, “On-Call” etc.)
  9. Oversees contractor work execution, safe work completion, and performance according to PLNG Contractor Management procedure. Reports contractor work quality/non-compliances issues to direct Supervisor and Planning/Contract teams.
  10. Monitors standards and carrier bottles availability. Work with Planning team members to ensure replacement standards are ordered and on site before the expiration date, as required.
  11. Support analyzer regulatory and fiscal testing procedures such as audits on CEMS.
  12. Maintain records of all maintenance actions taken (Preventive Maintenance, non-routine maintenance and repair activities on all critical Analyzers). This includes; CEMS Data Base, Non CEMS Data Base, LEL/Gas Detector Data Base, SQC Data Base, and ISO records.
  13. Work with Controls team to maintain and troubleshoot GC Analyzer Systems (such as AMADAS) communication network.
  14. Provide mentoring and coaching to others and holds personal accountability for performance and behavior.
  15. Identify and request required special and routine tools/equipment/PPE for the safe execution of maintenance activities under his/her area of responsibility.
  16. Participate in PLNG Ready for Operations (RFO) maintenance projects in order to develop required maintenance systems, process and procedures before commercial operations.
  17. Supports Analyzer equipment factory acceptance test (FAT) and site acceptance tests (SAT) as required.
  18. Supports Instrumentation and Controls team members as required.
  19. Participate in pre-commissioning, commissioning, startup and operation of the PLNG Facility. This will include being a vital member of the integrated commissioning / start-up team(s) with the EPC contractor.
  20. Participate in various reviews during the Engineering and Design Phases, such as HAZOPs, 3D model and P&ID reviews

 

Qualifications:

  1. Education and Certifications
    • Minimum of a high school diploma or GED; Technical degree in Instrumentation, or applicable nationally recognized standard Certification. (i.e. NCCER / NICET)
  2. Experience:
    • Minimum 3-5 years of maintenance Analyzer work experience in Oil & Gas, LNG or petrochemical facilities.
    • Strong knowledge of electrical industrial standards and regulations (i.e. ISA, NFPA 70E, FERC, GPA 2177, 2198, 2261-13,14,19)
    • Strong knowledge of preventive and corrective maintenance of Analyzers Instrumented equipment.
    • Strong applied knowledge of maintenance and inspection of critical analyzers, such as, but not limited to: ph meters, O2 meters, gas chromatography, infrared and ultraviolet detection technology, conductivity analyzers, online spectrometers, emissions monitoring, oxygen measurement, and regulatory, fiscal, environmentally required analyzers.
    • Experience/Knowledge GC Analyzers (i.e. AMADAS) systems.
    • Familiar with CMMS systems work management process (Work order process). SAP experience is preferred.
    • Work experience in small/medium scale Analyzer instrumented projects.

 

Skills:

  1. Strong leadership and organizational skills are required.
  2. Ability to communicate effectively at all levels of an organization and with individuals and groups from different disciplines, industries and governmental agencies
  3. Organized, strong planning skills, able to manage multiple activities in timely fashion and with a high degree of accuracy, able to meet work deadlines.
  4. Credibility to set high standards and promote continuous improvements initiatives.
  5. Able to work with a culturally diverse group of technical individuals.
  6. Possess the personality and ability to relate to and to establish a mutually respectful relationship with management, peers and the various facility level workers whom are all responsible for ensuring good operations.
  7. Exceptional problem solving and analytical skills.
  8. Able to operate Industrial Mobile Equipment (i.e. Forklift truck, Aerial Lift, ect...)
  9. Able to work at elevated height(s) over.
  10. Able to work over water and operate watercraft.
  11. Computer knowledge including Microsoft Office Suite including Word, Excel, and PowerPoint.
  12. Must maintain a Transportation Worker Identification Credential (TWIC) card in good standing status.

 

Venture Global LNG is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other basis covered by appropriate law.

 

 

 

 

#LI-Onsite

 

Apply for this Job

* Required
resume chosen  
Dropbox Google Drive
(File types: pdf, doc, docx, txt, rtf)
Cancel
cover_letter chosen  
Dropbox Google Drive
(File types: pdf, doc, docx, txt, rtf)
Cancel

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Venture Global LNG’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Our system has flagged this application as potentially being associated with bot traffic. Please turn off any VPNs, clear your browser cache and cookies, or try submitting your application in a different browser. If this issue persists, please reach out to our support team via our help center.
Please complete the reCAPTCHA above.