SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.

PROPULSION DESIGN ENGINEER (TURBOMACHINERY)

Work with brilliant, passionate engineers to tackle difficult problems and push the boundaries of rocketry. This team will engineer the rocket engines that will take humankind to Mars.

RESPONSIBILITIES:

  • Work with development turbomachinery engineers using requirements for a new propulsion system or component to convert those requirements into one or more 3-dimensional concepts, using NX, in the form of a mechanical layout for review
  • Consult with manufacturing engineers, thermal and structural analysts, development engineers, materials and process engineers and other product team members to refine the concept into a viable prototype to be further pursued for testing, development, qualification and flight
  • Use ANSYS to conduct basic finite element analysis to iterate the concept until it reaches a level of maturity where it can be studied by the propulsion analysis group for final, comprehensive analysis as defined by the project objectives
  • Take a general conceptual layout of a turbomachine or component device and break it down into detail parts that balance requirement for operability, reliability, cost, weight, producibility and several other criteria
  • Build up and own turbomachine tolerance stackup, incorporating information from operational simulations to understand critical interface clearances and inform manufacturing and assembly choices
  • Generate detail part production drawings fully dimensioned with GD&T verified to meet functional requirements by use of tolerance stackups
  • Interface with vendor or in-house fabrication and assembly teams during design and prototype hardware builds. Incorporate any produciblity lessons learned by design change and drawing revision
  • Support development testing efforts by incorporating design changes if necessary to further improve hardware performance or reliability
  • Provide ongoing technical support to production effort with engineering change orders to make design changes that improve producibility or reliability
  • Responsible for configuration management at the system or subsystem level using Teamcenter
  • Results will meet requirements, applicable specifications and be manufacturable

BASIC QUALIFICATIONS:

  • Bachelor’s degree in an engineering discipline
  • 3+ years of experience using CAD to design parts/assemblies
  • Experience working with fluid systems

PREFERRED SKILLS AND EXPERIENCE:

  • 5+ years of professional  3D CAD design experience
  • 5+ years of professional finite element analysis (FEA) experience
  • Ability to design parts, tooling and test fixtures necessary to build rocket engine hardware
  • Familiar with high strength, oxidation resistant, propellant compatible materials for use in cryogenic and high temperature environments
  • Familiar with manufacturing capabilities (typical tolerances) and processes: turning, milling, drilling, reaming, EDM, grinding, brazing, welding, 3D printing
  • Familiar with mechanical seals (metallic and elastomeric o-rings) and threaded fasteners
  • Understanding of high pressure fluid tubing systems and typical fittings for aerospace hardware and applicable standards
  • Basic understanding of NDT techniques and how to design hardware for ease of inspection
  • Fundamental understanding and ability to implement GD&T
  • Ability to do hand calcs to roughly size structural elements of a design
  • Familiarity and/or experience with turbomachinery
  • Ability to pre-size components using finite element modeling
  • Extensive knowledge of propulsion engine systems and components
  • Proficiency with NX, Teamcenter and ANSYS

ADDITIONAL REQUIREMENTS:

  • Willingness to travel in support of launching and testing of hardware 

ITAR REQUIREMENTS:

  • To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here.  

SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status.

Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should notify the Human Resources Department at (310) 363-6000.

Apply for this Job

* Required
  
  
When autocomplete results are available use up and down arrows to review
+ Add Another Education


U.S. Equal Opportunity Employment Information (Completion is voluntary)

Individuals seeking employment at SpaceX are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, gender identity, or sexual orientation. You are being given the opportunity to provide the following information in order to help us comply with federal and state Equal Employment Opportunity/Affirmative Action record keeping, reporting, and other legal requirements.

Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.


Form CC-305

OMB Control Number 1250-0005

Expires 05/31/2023

Voluntary Self-Identification of Disability

Why are you being asked to complete this form?

We are a federal contractor or subcontractor required by law to provide equal employment opportunity to qualified people with disabilities. We are also required to measure our progress toward having at least 7% of our workforce be individuals with disabilities. To do this, we must ask applicants and employees if they have a disability or have ever had a disability. Because a person may become disabled at any time, we ask all of our employees to update their information at least every five years.

Identifying yourself as an individual with a disability is voluntary, and we hope that you will choose to do so. Your answer will be maintained confidentially and not be seen by selecting officials or anyone else involved in making personnel decisions. Completing the form will not negatively impact you in any way, regardless of whether you have self-identified in the past. For more information about this form or the equal employment obligations of federal contractors under Section 503 of the Rehabilitation Act, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

You are considered to have a disability if you have a physical or mental impairment or medical condition that substantially limits a major life activity, or if you have a history or record of such an impairment or medical condition.

Disabilities include, but are not limited to:

  • Autism
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, or HIV/AIDS
  • Blind or low vision
  • Cancer
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or hard of hearing
  • Depression or anxiety
  • Diabetes
  • Epilepsy
  • Gastrointestinal disorders, for example, Crohn's Disease, or irritable bowel syndrome
  • Intellectual disability
  • Missing limbs or partially missing limbs
  • Nervous system condition for example, migraine headaches, Parkinson’s disease, or Multiple sclerosis (MS)
  • Psychiatric condition, for example, bipolar disorder, schizophrenia, PTSD, or major depression

1Section 503 of the Rehabilitation Act of 1973, as amended. For more information about this form or the equal employment obligations of Federal contractors, visit the U.S. Department of Labor's Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.