About Redwood Materials

Redwood Materials was founded in 2017 to create a circular supply chain for electric vehicles and clean energy products, making them more sustainable and driving down the cost for batteries. We’re doing this by developing and deploying new technologies to increase the scope and scale of recycled and sustainable materials in the global battery supply chain.

Technical Program Manager 

Redwood Materials is currently searching for a Technical Program Manager to join our Engineering teams to develop the next generation of materials.

You will be immersed in the design engineering process and will shepherd projects from concept through to prototype validation and then production ramp. You will use your engineering background to understand the product requirements, technical risks and the validation strategy to accelerate the development process.  You will communicate and present project status, highlight schedule risk, and develop recovery plans in the event of project slip. On a daily basis, you will interface with cross function teams - design, manufacturing, compliance, supply chain and operations to define and drive development of new product programs, while also managing changes in existing programs.  

As a Technical Program Manager, you will be expected to operate with a high degree of autonomy on your programs while contributing to the development of tools and processes that improve the organization’s productivity.

Responsibilities will include:

  • Define, implement and drive project requirements, workflows and plans while managing timelines, resources, communications, quality, risks, uncovering roadblocks, defining critical paths, identifying resource constraints, and any other issues that arise.
  • Partnering with the program sponsor, architects, tech leads and engineers, business leads and dependent system stakeholders to ensure milestones are met and project is a success.
  • Program manager large CAPEX projects delivering on time, within budget and according to specifications.
  • Identify and document all project milestones and deliverables and keep project plans up to date at all times, including resource allocations, tracking hours, monitoring schedules, milestones, deliverables, updating percentage completion, etc.
  • Set goals, track deliverables, manage expectations, identify risk and drive mitigations across all stages of the project.
  • Provide insight around potential risks and opportunities, resolve conflict, initiate resolution and deliver results.
  • Continuously monitor and measure project processes and activities to identify and communicate potential issues, risks, or problems in a timely fashion and provide corrective action options to drive to resolution.
  • Escalate schedule delays due to issues and risks.
  • Track and manage change requests to scope and obtain approval if necessary.
  • Create formal project communication plans, key project metrics and dashboards for project status communication.
  • Conduct project evaluations, post-mortems, and drive process change to incorporate learning.

Desired Qualifications

  • BS/MS in Engineering or MBA, and 5-10 years of program/project management experience in a fast paced, highly fluid environment or other evidence of exceptional ability. PMP is preferred but not required.
  • Excellent program management skills and expertise of Big CAPEX projects as well as long-standing and proven professional experience as a Program Manager Engineering in domestic/global, strategic projects in a manufacturing environment. 
  • Experience in Engineering environment.
  • Proficiency in Jira.
  • Familiarity in several Agile principles - Scrum, Kanban etc.
  • Self-organized, outstanding written and verbal communication skills.
  • Strong analytical and problem-solving skills.
  • Demonstrated, applied experience delivering complex programs and projects.
  • Experience working with stakeholders, Product & Engineering Managers to keep everyone aligned.
  • Proficiency in MS Office Suite and MS Project.
  • A passion for sustainability and making the world a better place!

The position is full-time. Compensation will be commensurate with experience.

 

We collect personal information (PI) from you in connection with your application for employment with Redwood Materials, including the following categories of PI: identifiers, personal records, professional or employment information, and inferences drawn from your PI. We collect your PI for our purposes, including performing services and operations related to your potential employment. If you have additional privacy-related questions, please contact us at privacy@redwoodmaterials.com.

Apply for this Job

* Required
resume chosen  
(File types: pdf, doc, docx, txt, rtf)
cover_letter chosen  
(File types: pdf, doc, docx, txt, rtf)


Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Redwood Materials’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.


Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.


Enter the verification code sent to to confirm you are not a robot, then submit your application.

This application was flagged as potential bot traffic. To resubmit your application, turn off any VPNs, clear the browser's cache and cookies, or try another browser. If you still can't submit it, contact our support team through the help center.