Back to jobs

CNC Machining Engineer

Avon, OH

About Re:Build Manufacturing & Cutting Dynamics, LLC

Cutting Dynamics, LLC is part of the Re:Build family of companies, located in Avon, Ohio. They have been serving aerospace and other industries for over 30 years. The Mission of Cutting Dynamics is to provide unmatched value to customers in need of high-quality components, assemblies, or kitting needs within the aerospace industry. We accomplish this through an established system of measurable objectives, industry-leading technology, and continual improvement.

Re:Build Manufacturing is a growing family of industrial and engineering businesses combining enabling technologies, operational superiority, and strategic M&A to build America’s next generation industrial company. At Re:Build we deploy deep expertise in engineering, operations management, and technology to supercharge the performance of our member companies. We leverage deep professional expertise and a candid, principled operating culture to drive differentiated outcomes. Ours is a fast-paced environment where individuals can stretch and be challenged to pursue their fullest potential.

Re:Build was founded to pioneer a profitable model for the revitalization of US manufacturing. We’ve assembled a powerful set of complimentary capabilities and lines of business that enable us to pursue a wide range of end markets. Our acquired businesses are grounded in build-to-print and by-the-hour engineering and design services, and we’re leveraging their combined expertise to migrate to increasingly sophisticated program development and production, as well as the generation of our own products. Our unique set of capabilities lend themselves to highly complex systems and products, and we offer customers a range of services including product and systems design, automation, fabrication, assembly, and large volume contract manufacturing. Our customers span a wide array of industries including aerospace, defense, mobility, healthcare, pharma, biotech, clean tech, chemicals, energy, lifestyle, food production, and industrial equipment.

Who we are looking for

The CNC Machining Engineer will conduct both pre-order and post-order technical review of machined product, develop machining strategies and fixture designs, estimate cycle times and required production routings, and provide general technical support to CNC programming and machining operations.

What you will get to do

  • Conduct technical review of customer drawings, models, and specifications
  • Provide feedback on manufacturability, including DFM input on customer designs
  • Determine and establish machining strategy, including number, type, and sequence of machining operations for the product by using our equipment and capabilities efficiently
  • Develop machining cycle time estimates and recommended starting material stock size for both product and any custom fixturing required
  • Establish material configuration in ERP system for purchase
  • Review and support entry of routing sequence in ERP system ensuring that it supports the machining strategy developed at quote stage
  • Design custom work holding fixtures to support machining strategy and generate CAD models and drawings used to manufacture them
  • Generate CAD machining assemblies with parts and fixtures to illustrate work holding and machining strategy for programmers

What you bring to the team

  • Preferred 4-year engineering or technology degree from accredited university
  • Minimum of 5 years of CNC programming experience in a precision metals machining production environment, including 3, 4, and 5 axis milling equipment
  • Experience developing machining strategies and estimating run times
  • Experience with an ERP system and Quality Management System
  • Aerospace proven experience preferred
  • Proficiency with SolidWorks and generating CAD models and assemblies
  • Ability to provide DFM input and feedback on customer designs commensurate with our manufacturing capabilities

The BIG payoff

We are a company who is going to make a difference in the industries and the communities in which we choose to operate.

Every employee of Re:Build will share ownership in the company and will share in the financial rewards of the success we achieve together, at all levels of the company!

We want to work with people that reflect the communities in which we operate

Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure, and life experiences. Or for any other reason.

Re:Build is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or accommodation due to a disability, you may contact us at accommodations.ta@ReBuildmanufacturing.com or you may call us at 617.909.6275.

Apply for this job

*

indicates a required field

Resume/CV*

Accepted file types: pdf, doc, docx, txt, rtf

Cover Letter

Accepted file types: pdf, doc, docx, txt, rtf

Select...
Select...
Select...
Select...
Select...

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Re:Build Manufacturing’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Select...
Select...
Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Select...

Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury
Select...

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.