Who is Fikst?

Fikst, a Re:Build Manufacturing company, is a dynamic product development and engineering consulting firm located in Wilmington, MA. We work with pioneering clients to develop their technology, design their products, and bring those products to production. Fikst's areas of expertise include biomedical instruments and consumables, microfluidics, specialty plastic design, optics, industrial automation, robotics, and design for manufacturing. We have extensive in-house laboratory and rapid prototyping capability including CNCs, 3D printers and laser cutters, which help facilitate our ability to prototype and innovate fast. As part of Re:Build Manufacturing, we are able to collaborate with other member sites and leverage a greater network of capabilities including composites, industrial design, structural analysis, and embedded systems design.

Who is Re:Build Manufacturing?

Re:Build Manufacturing is rekindling America's manufacturing base and creating meaningful, sustainable jobs in areas that have been deindustrialized over the past 20-30 years. Our strategy is to employ technology, systems, deep financial resources, and best management practices to compete and win as manufacturers in the global market. We are NOT private equity. We do not buy companies with the intention of selling them. Over the next decades, we want to make a difference in the US Manufacturing economy and the communities in which we operate. We believe in the power of people and the long-term competitive advantage that can be derived from helping our employees achieve their fullest potential

Who we are looking for

We’re hiring experienced mechanical engineers who are excited for the variety and challenge of product development. In this role you will exercise your mechanical design experience in an energetic and progressive consulting environment. You’ll join a group of talented engineers to lead the development of new technologies and bring new products to market. You will be a lead technical contributor in addition to leading client communication and project management. You will support your team through the product design process, coaching young engineers through technical challenges while balancing project scope and timelines. You will do all of this in lively collaboration with your fellow engineers and our clients.

What you'll get to do

Creative problem solvers who can connect scientific theory with engineering design to create novel products.
Strong communicators who can convey the merit of solutions to our clients’ challenges.
Hands-on craftspeople who like to build breadboards and refined prototypes.
Life-long learners who can take on a challenge in an unfamiliar field and quickly contribute to solutions.
Collaborators that enjoy working in teams of scientists, electrical engineers, optical engineers, manufacturing partners, and industrial designers.
Results-oriented engineers who thrive in a streamlined environment, using the right tools and minimizing bottlenecks to get the job done.
Mentors who enjoy engaging with less experienced engineers to get great work done.
Organized thinkers who can guide clients through the big picture while deep diving into the technical details.

What you bring to the Team

B.S. in Mechanical Engineering or a related field
8-12 years of industry experience
Broad technical background and the desire to learn more
3D CAD experience (SolidWorks preferred)
Experience with a range of manufacturing processes is a plus (injection molding, machining, sheet metal, casting, etc.)
Experience designing biomedical products or industrial automation a plus
Experience in consulting is a plus

The BIG payoff

We are a company that is going to make a difference in the industries and the communities in which we choose to operate.

Every employee of Re:Build will share ownership in the company and share in the financial rewards of the success we achieve together, at all company levels!

We want to work with people that reflect the communities in which we operate

Re:Build Manufacturing is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, veteran status, marital status, parental status, cultural background, organizational level, work styles, tenure and life experiences. Or for any other reason.

Re:Build is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at accommodations.ta@ReBuildmanufacturing.com or you may call us at 617.909.6275.

Apply for this Job

* Required

First Name *

Last Name *

Email *

Phone *

Resume/CV *

Dropbox Google Drive

(File types: pdf, doc, docx, txt, rtf)

Cover Letter

Dropbox Google Drive

(File types: pdf, doc, docx, txt, rtf)

Are you authorized to work for any U.S. employer? *

Will you now, or at any point in the future require visa sponsorship to work lawfully in the United States? *

This position requires access to export-controlled information. To comply with U.S. export control regulations, applicant must be a U.S. citizen, lawful permanent resident, refugee, asylee, or eligible to obtain the required export authorizations. Are you a U.S. citizen, lawful permanent resident, refugee, or asylee? *

We would like to use SMS communication to contact you with regards to your application. Do you approve? *

LinkedIn Profile

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Re:Build Manufacturing’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Gender

Are you Hispanic/Latino?

Please identify your race

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Veteran Status

Voluntary Self-Identification of Disability

Form CC-305

Page 1 of 1

OMB Control Number 1250-0005

Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

Alcohol or other substance use disorder (not currently using drugs illegally)
Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
Blind or low vision
Cancer (past or present)
Cardiovascular or heart disease
Celiac disease
Cerebral palsy
Deaf or serious difficulty hearing
Diabetes
Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
Epilepsy or other seizure disorder
Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
Intellectual or developmental disability
Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
Missing limbs or partially missing limbs
Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
Partial or complete paralysis (any cause)
Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
Short stature (dwarfism)
Traumatic brain injury

Disability Status

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Enter the verification code sent to to confirm you are not a robot, then submit your application.

Security Code *

This application was flagged as potential bot traffic. To resubmit your application, turn off any VPNs, clear the browser's cache and cookies, or try another browser. If you still can't submit it, contact our support team through the help center.

Senior Mechanical Engineer