Orbit Fab's mission is to create the foundational infrastructure that will fuel a bustling in-space economy, capable of sustaining permanent jobs in space. 

Today, satellites cannot be refueled, which severely constrains their mobility and inhibits the development of economic activities in space. 

Orbit Fab breaks the single-use paradigm, pioneering our Gas Stations in Space™ refueling infrastructure and RAFTI™ technology to deliver propellant in space, enabling lower-cost satellite construction, increased maneuverability, precise control, and extended lifespans. The possibilities are unprecedented, opening the doors to unimagined operational strategies and business models. 

Since our establishment in 2018, we have already achieved the successful launch of three tankers to space. With offices in both the US and UK, we are working in close collaboration with partners and customers across the space industry. Orbit Fab is rapidly ramping up capabilities and requires exceptional talent to tackle important challenges. Our roles offer wide ranging opportunities to have a demonstrable impact and enable a bustling in space economy. 

Orbit Fab likes to move fast, break barriers, and change the way space missions work. We're looking for the best minds, backed by a practical can-do attitude. We describe here the skills, qualifications, and responsibilities that we need to have as a team. Aptitude for complex technical challenges and practical experience is key. Your days will consist of electrical avionics hardware design, development, test, and production support to enable an on-orbit propellant supply for the 21st century of space innovation. As an engineer at Orbit Fab, you’ll exercise your practical problem solving for complex space systems. A strong candidate will call upon a breadth of experience developing systems under-budget and on time. 

We describe here the skills, qualifications, and responsibilities that we need to have as a team. You don't need all of them. Your aptitude for complex technical challenges and your practical experience designing/building/coding stuff will trump specific qualification or tools any day! 

 

ROLE 

You would be responsible for developing custom electronics to support a variety of upcoming Orbit Fab missions. You’ll be performing High Reliability Circuit Design, Analysis, Schematic Capture and Layout. Your technical duties will involve owning critical electrical systems designs required to support the development of Orbit Fab electronics. A major emphasis will be on designing electronics specifically for operation in space environments.  

 

RESPONSIBILITIES 

  • Design, test and fly electrical and avionics systems across Orbit Fab's projects. 
  • Implement technical decision-making processes, perform technical development, and run technical trades across various space systems disciplines. 
  • Identify technical issues and proactively implement resolutions to mitigate schedule and cost impacts.  
  • Perform documentation of the structure and functionality of flight electronics.  
  • Manage electrical focused projects/tasks and interactions with contractors and vendors to meet the needs of the project. 

 

QUALIFICATIONS 

  • Bachelor’s degree or higher in engineering, physics, mathematics, or other related discipline. 
  • 4+ years of demonstrated applicable experience in electronics design, development, or test across multiple projects/programs, including: 
    • Circuit/board design and board bring up. 
    • Experience with rapid prototyping for test. 
    • Experience interfacing with firmware engineers to co-develop microcontroller firmware. 
    • Experience with performing EEE parts stress and derating analysis. 
    • Experience integrating custom electronics with hardware actuators and sensors and performing hardware-in-the-loop development. 
    • Expertise in payload electronics integration and harnessing. 
  • Experience with key design, detailed analysis, and engineering management tools, including: 
    • Altium and LTSpice for circuit design and analysis.
    • JIRA or JIRA-like tools (Asana) for project management.
    • JAMA or Valispace for requirements tracking. 
  • Experience taking a product from concept phase through prototyping, production, and operation. 
  • A familiarity and appreciation for the multiple spacecraft engineering disciplines, how they interact and what effects them, gained through participating or collaborating with them on engineering projects. 
  • Expertise working in a diverse, multidisciplinary team environment that includes business communication and diverse engineering disciplines.  
  • Excellent oral and written communication skills.  
  • Must be willing and able to work a hybrid schedule (3-5 days a week on site) out of our Lafayette, CO office

 

WE'LL BE EXCITED IF YOU HAVE 

  • A Masters, Ph.D., or other advanced degree in engineering, physics, math, or related discipline. 
  • Experience or flight design heritage on LEO and/or GEO missions, especially radiation design of boards for these environments. 
  • Experience or flight design heritage with spacecraft and spacecraft subsystem design. 
  • Experience with spacecraft and subsystem environment definition (radiation, thermal, EMI/EMC, etc.) and design approaches (at LEO, GEO, and Deep Space). 
  • Experience with Spacecraft propulsion systems and pressure systems. 
  • Experience with Level 2 Spacecraft Design/EEE-INST-002 or similar standards for spacecraft design 
  • Experience with spacecraft and spacecraft subsystem fabrication, assembly, and test; understanding of qualification, acceptance, and proto-flight verification approaches. 

 

The estimated salary range for this position is as follows

  • Electrical Engineer II: $100,000-120,000 
  • Senior Electrical Engineer (III): $120-140,000

 

Research shows that while men apply to jobs where they meet an average of 60% of the criteria, women and other marginalized people tend to only apply when they meet 100% of the qualifications. At Orbit Fab, we value respectful debate and people who aren’t afraid to challenge assumptions. We strongly encourage you to apply if you feel you would succeed in the role above.

 

Location and Benefits

Orbit Fab is based out of Lafayette, Colorado and all roles are based in Colorado. We offer fully covered benefits, discretionary time off, and flexible work hours.

 

Eligibility

Some job roles may be limited to US Persons (22 CFR 120.62 “U.S. person”).

Orbit Fab Inc does not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor.

Apply for this Job

* Required
resume chosen  
Dropbox Google Drive
(File types: pdf, doc, docx, txt, rtf)
Cancel
cover_letter chosen  
Dropbox Google Drive
(File types: pdf, doc, docx, txt, rtf)
Cancel

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Orbit Fab’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Enter the verification code sent to to confirm you are not a robot, then submit your application.

This application was flagged as potential bot traffic. To resubmit your application, turn off any VPNs, clear the browser's cache and cookies, or try another browser. If you still can't submit it, contact our support team through the help center.