About LightForce

LightForce is a 3D printing technology company focused on the orthodontic space. Our digital platform empowers orthodontists with fully customized, 3D-printed tooth-moving tools. In 2019, we launched their first product - the world’s only, fully customized 3D printed bracket system and digital treatment software. We are proud to be one of the fastest growing companies in the industry. Learn more at www.lf.co

Description

We are looking for a Process Engineer to join our Physical Manufacturing team at LightForce Orthodontics. You will be part of a small team of Process Engineers and find that your day-to-day tasks actively contribute to our company’s success. Our ideal teammate communicates effectively, is process and data-driven, works well under pressure, and is eager to learn. 

The Process Engineer will be responsible for supporting the production team. This may include projects related to traceability, scaling, quality control, and root cause analysis to name a few! You will become intimately familiar with our production workflow, allowing you to drive high level improvements to the manufacturing process. 

Essential Duties and Responsibilities

  • Address Corrective and Preventive Actions (CAPAs) via root cause analysis and design of experiments (DOEs)
  • Drive improvements to process and production metrics (safety, quality, delivery, cost) 
  • Ensure all processes comply with safety and quality standards
  • Apply lean manufacturing techniques (e.g., 5S) to process and production improvements
  • Ensure Good Manufacturing Practices (GMPs) and Standard Operating Procedures (SOPs) are updated as process improvements and changes are released to production
  • Optimize the solutions (processes, machines, tools) employed within our production environment 
  • Perform process workflow simulations, risk assessments, and process change validation
  • Continually evaluate equipment and processes to ensure high efficiency and quality
  • Design and test jigs and other manufacturing aids to support productivity and performance metrics 
  • Support production team by troubleshooting issues

Education & Experience

  • 0-2 years of Engineering experience. 
  • Minimum of a Bachelor’s degree in Engineering or Engineering Technology.
  • Experience with ISO 13845 or medical device regulation is a plus.
  • Experience in project management methodologies is a plus.
  • Experience working in a startup environment is a plus.
  • Experience with additive manufacturing is a plus.
  • Experience with QuickSight, Jira, and/or GitHub is a plus.

Required Qualifications

  • Knowledge of manufacturing methods and procedures, manufacturing quality, and process development.
  • Ability to navigate complex issues and problems
  • Ability to work with cross functional teams (production, engineering, and R&D). 
  • Analytical thinker with the ability to assess and navigate risks, perform failure and root cause analysis, and develop design of experiments.
  • Strong verbal and written communication skills. 
  • Ability to assess workload and select priorities in an ambiguous environment. 
  • Analytical thinker.

Physical Demands 

  • Frequent standing, walking, bending, reaching, hand, and finger manipulation.
  • Perform work activities with production chemicals, adhesives and epoxies, using required personal protective equipment  

Work Environment

  • Office environment up to 100%
  • Work is generally performed in an open office, sedentary position
  • Limited temperature fluctuations, heated and air conditioned environment
  • Work is performed near moving mechanical parts and occasionally with sensitive chemicals
  • The noise level in the work environment is usually moderate 

Perks and Benefits (US employees only)

  • 10 paid holidays per year
  • Unlimited PTO
  • Generous premium coverage for medical, dental, and vision plans
  • Group plan voluntary life insurance
  • Fringe benefits
  • 401k retirement plan
  • Paid parental leave
  • Workplace perks such as food/coffee

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

LightForce Orthodontics is an Equal Opportunity/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, Protected Veteran status, sexual orientation, or any other characteristic protected by federal, state, or local law.

Apply for this Job

* Required

resume chosen  
(File types: pdf, doc, docx, txt, rtf)


Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in LightForce Orthodontics’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.


Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.


Enter the verification code sent to to confirm you are not a robot, then submit your application.

This application was flagged as potential bot traffic. To resubmit your application, turn off any VPNs, clear the browser's cache and cookies, or try another browser. If you still can't submit it, contact our support team through the help center.