About Helion

We are a fusion power company based in Everett, WA, with the mission to build the world's first fusion power plant, enabling a future with unlimited clean electricity. Our vision is a world with clean, reliable, and affordable energy for everyone. 

Since Helion's founding in 2013, we have raised over $600 million from investors such as Sam Altman, Mithril, and Capricorn Investment Group to propel us forward. Our last prototype, Trenta, completed 10,000 high-power pulses and reached plasma temperatures of 100 million degrees Celsius (9 keV). 

Now we are working toward Polaris, which will be the first machine to demonstrate electricity from fusion, making this a great time to join Helion! Bring your skills, experiences, and determination to make a difference in the world. Together, we can make a future with unlimited clean electricity from fusion a reality. 

What You Will Be Doing:

We are looking for an engineer with experience working with plasmas to join the Test Operations team. As an R&D Engineer, you will help design and operate experimental facilities focused on the development of plasma technologies to improve our FRC fusion performance. You will work in our FRC pre-ionization development area. You will report to our Fusion Test Lead at our Everett, WA office.

You Will:

  • Install and operate high density plasma generation systems (e.g. helicon, ECR, ringing theta)
  • Design, install, and operate experimental diagnostics, including plasma diagnostics
  • Provide design and test engineering support of vacuum systems, gaseous fuel systems, high-voltage power electronics, and data acquisition systems
  • Prepare experimental test plans and procedures, and present at test readiness reviews
  • Maintain experimental facilities and related support equipment such as vacuum systems, gas fueling systems, high-voltage power electronics, data acquisition systems, and diagnostics
  • Develop and validate technical specifications to comply with project requirements
  • Analyze diagnostic test data, write reports, and present results
  • Use critical reasoning to identify strengths and weaknesses of different technical solutions
  • Work with members of other teams to develop technical solutions

Required Skills:

  • B.S. or M.S in Aerospace engineering, physics, or related field of study and 3+ years of experience with experimental plasma physics in hands-on environment
  • Experience working with magnetized vacuum plasmas, e.g. thrusters, helicon sources, nuclear fusion experimental plasmas
  • Hands-on hardware experience with vacuum systems, high pressure gas flow systems, plasma diagnostics, HV pulsed power systems, and data acquisition systems
  • Experience in the design, build, and test approach of seeing a technical project through from conception to completion
  • Demonstrated ability and desire to rapidly learn new systems
  • Demonstrated experience taking on complex problems, defining and accomplishing challenging objectives with minimal guidance
  • Experience scripting data analysis routines in a common language (e.g. Matlab, Python, etc.)
  • Demonstrated ability to work collaboratively and communicate effectively as a member of a team

Desirable Skills:

  • Experience with writing/using LabVIEW control GUIs
  • Experience with National Instruments PXI/DAQ hardware

The pay range for this position is $115k-175k. This pay range may be inclusive of several career levels and will be narrowed based on several factors, including the candidate’s experience and qualifications.

#LI-TM1 #LI-Onsite #LI-KL1

Benefits and Compensation

Our total compensation package includes generous equity and benefits, including but not limited to: 

  • Medical, Dental, and Vision plans for employees and their families 
  • 31 Days of PTO (21 vacation days and 10 sick days) 
  • 13 Paid holidays, plus company-wide winter break 
  • Up to 5% employer 401(k) match 
  • Short term disability, long term disability, and life insurance 
  • Paid parental leave and support (up to 16 weeks) 
  • Annual wellness stipend  

NOTE: Underrepresented people are less likely to apply unless they meet 100% of the job's requirements. We believe in hiring people, not checklists, and encourage you to apply even if you do not check all of the boxes. If this job isn't the one, we have many other openings that may be a fit.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. If we reach out to you to begin an interview process, we will also ask if you require any reasonable accommodation at that time.

Apply for this Job

* Required
resume chosen  
(File types: pdf, doc, docx, txt, rtf)
cover_letter chosen  
(File types: pdf, doc, docx, txt, rtf)


Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Helion Energy’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.


Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.


Enter the verification code sent to to confirm you are not a robot, then submit your application.

This application was flagged as potential bot traffic. To resubmit your application, turn off any VPNs, clear the browser's cache and cookies, or try another browser. If you still can't submit it, contact our support team through the help center.