If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply.
 
ABOUT THE ROLE
You will be a member of our multi-disciplinary team and will work under the direction of a licensed Engineer and designated project leadership. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. 
 
HERE'S WHAT YOU'LL DO
  • With appropriate supervision you may perform designs of uncomplicated piping and equipment selection for Plumbing/Fire Protection systems for building design. As necessary assist with HVAC Designs.
  • Prepare Revit/BIM modeling of construction drawings of plumbing and fire protection systems from schematic design to construction administration phases including layout, sketches and detail drawings as required, with supervisory oversight. As necessary perform Revit/BIM modeling for HVAC systems.
  • Assist with editing specifications relating to existing and new projects.
  • Review submittals and shop drawings for compliance with the contract documents.
  • Research as assigned and respond to emergent issues.
  • May write draft reports to be reviewed by a professional engineer.
  • Assists in gathering information to respond to RFI’s and review of change orders in the preparation of construction documents.
  • May perform job site visits to verify existing conditions and observe construction progress. Site visits frequently require a physical walk-through of site.
  • May coordinate specific activities on particular elements of a project.
  • Perform other duties as assigned.
HERE'S WHAT YOU'LL NEED
  • Bachelor or Master's degree in Engineering required. Bachelor or Master's degree in Engineering from an ABET accredited program preferred.
  • Minimum of 2+ years of related experience required.
  • Current CPD, PE in Mechanical or FPE in the United States preferred.
  • LEED accreditation preferred.
  • Excellent verbal and written communication skills.
  • Able to effectively handle multiple projects.
  • Experience in computer applications for engineering design programs (i.e. Revit) required.
The salary range for this position to be filled in the Buffalo, NY office is $62,600 to $72,975 annually. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at https://www.cannondesign.com/careers/benefits. Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level.
 
ABOUT OUR FIRM
CannonDesign is a design practice where strategy, experience, architecture, engineering, and social impact converge. We don’t just dream up solutions — we create and bring them to life in ways to solve some of the biggest challenges facing our clients and the society. At the heart of everything we do is Living-Centered Design, a bold commitment to using our talents to not just improve the world but to truly reshape it for the better. It’s more than a philosophy — it’s who we are, and it drives us to make a meaningful, lasting difference every day.
 
ABOUT WORKING HERE
  • We are relentless in our pursuit of client adoration (not simply satisfaction). Consistent delivery of the best service is what we are about.
  • We are committed to ensuring our practice provides equal opportunities for all employees, as we strive to connect with communities around us and focus on the future of design. We support equity, diversity, and inclusion efforts that benefit all employees through the leadership of our DEI Council, our Employee Resource Groups which are open to everyone, and other community initiatives.
  • We’re about communication and transparency here. If you want to talk to someone about an idea you have, or a challenge that needs addressing, we’re ready for you.
 
Please note that candidates can only apply to our positions on our company Careers site. It's not uncommon for scammers to create positions that look legitimate on other sites; never enter your information or apply for CannonDesign positions on any platform. Should an issue arise that you feel we should be aware of, please contact us. Please provide your resume and portfolio when applying.
 
As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct.
 
CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm’s policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign’s policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints.

Apply for this Job

* Required
resume chosen  
(File types: pdf, doc, docx, txt, rtf)
cover_letter chosen  
(File types: pdf, doc, docx, txt, rtf)
When autocomplete results are available use up and down arrows to review
+ Add another education
+ Add another employment


Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in CannonDesign’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.


Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.


Enter the verification code sent to to confirm you are not a robot, then submit your application.

This application was flagged as potential bot traffic. To resubmit your application, turn off any VPNs, clear the browser's cache and cookies, or try another browser. If you still can't submit it, contact our support team through the help center.