Archer is an aerospace company based in San Jose, California building an all-electric vertical takeoff and landing aircraft with a mission to advance the benefits of sustainable air mobility. We are designing, manufacturing, and operating an all-electric aircraft that can carry four passengers for 100 miles at speeds of up to 150 mph while producing minimal noise. 

Our sights are set high and our problems are hard, and we believe that diversity in the workplace is what makes us smarter, drives better insights, and will ultimately lift us all to success. We are dedicated to cultivating an equitable and inclusive environment that embraces our differences, and supports and celebrates all of our team members.

What you’ll do:

  • Apply knowledge of electrical components, interiors, systems integration or structural assembly and installation to collaborate and influence our multidisciplinary Product Design Engineering, Quality, Manufacturing and Facilities teams in the development of a new eVTOL aircraft.
  • Use your knowledge of industry standard components to develop the manufacturingBuild Plan (line layout, manufacturing work instructions, part flow, tools, equipment, precedence network, testing processes, etc.)
  • Develop and author detailed manufacturing work instructions for structural assembly, interiors integration, or systems installation.
  • Support the manufacturing shop floor through Root Cause and Corrective Action (RCCA), red line activities, process improvements, and flow reduction activities.
  • Drive the Design for Manufacturability efforts with the product design team.
  • Develop and implement cost effective and improved processes for Lean production and tooling methodologies.
  • Work in a fast paced and flexible environment.
  • Willingness to look for alternative solutions and come up with improvements for the installation.
  • Planning of workflow, workflow utilization, layout of equipment and workspace for maximum efficiency.
  • Perform technical data analysis related to product workflow, manpower forecasting, and manufacturing performance.
  • Design of tools and fixtures to aid the manufacturing processes.
  • Develop specification for tooling and automation equipment.
  • Implement process control plans to ensure process capability.
  • Oversee Final Acceptance Testing of manufacturing equipment.
  • Conduct process failure mode and analysis (PFMEA) for the production system.
  • Support supply chain development and procurement.
  • Support first unit builds and testing of the production system.

What You'll Need:

  • Bachelor's degree in Manufacturing, Mechanical, Electrical, Aerospace Engineering or related field
  • 10-15 years of experience in aircraft or automotive assembly and integration manufacturing.
  • Hands on experience in the processes involved in fabricating, installing, inspecting, and testing aerospace harnesses
  • Manufacturing Work Instruction developing experience
  • Understanding of design for manufacturing, lean manufacturing, and capacity planning techniques
  • Strong organizational and communication skills

Bonus Qualifications:

  • Siemens NX/Teamcenter/EasyPlan experience
  • Demonstrated experience in statistical process control and GD&T
  • Experience developing production lines from prototype to mass production
  • FAR 23 experience
  • Part 21 experience
  • Working under an FAA Production Certificate
  • Standing up a new production facility
  • Experience in automation and robotics
  • Willing to work alternative shifts

At Archer we aim to attract, retain, and motivate talent that possess the skills and leadership necessary to grow our business. We drive a pay-for-performance culture and reward performance that supports the Company’s business strategy. For this position we are targeting a base pay between $115,000 - $135,000. Actual compensation offered will be determined by factors such as job-related knowledge, skills, and experience.

Archer is committed to working with and providing reasonable accommodations to job applicants with physical or mental disabilities, and those with sincerely held religious beliefs. Applicants who may require reasonable accommodation for any part of the application or hiring process should provide their name and contact information to Archer’s People Team at people@archer.com. Reasonable accommodations will be determined on a case-by-case basis.

Archer is unable to provide work visa sponsorship for this position at the present time.
Archer is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the basis of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.
Archer Aviation does not engage with external recruiting agencies/individual recruiters with whom it does not have a prior written agreement. Archer reserves the right to make use of any unsolicited resumes that it receives and bears no responsibility for payment of any fees asserted from the use of unsolicited resumes. If you are a recruiting agency or individual recruiter wishing to do business with Archer, please reach out to People@archer.com. All employment processes are managed by the Archer People Team.

Apply for this Job

* Required
resume chosen  
Dropbox Google Drive
(File types: pdf, doc, docx, txt, rtf)
Cancel
cover_letter chosen  
Dropbox Google Drive
(File types: pdf, doc, docx, txt, rtf)
Cancel

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Archer’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Our system has flagged this application as potentially being associated with bot traffic. Please turn off any VPNs, clear your browser cache and cookies, or try submitting your application in a different browser. If this issue persists, please reach out to our support team via our help center.
Please complete the reCAPTCHA above.