What we're building

Our vision is to electrify all waterborne vessels, and we're starting with electric water sport boats.

Gas boats dominate today’s marine industry not because of great product offerings but because of a lack of better alternatives. Boaters have grown accustomed to vehicles that feel stuck in the 1980s: unreliable, expensive, loud, noxious, and a nightmare to own and operate. They’re also awful for the water and air they reside in.

By contrast, electric boats are superior in nearly every way: not only are they far more reliable and less costly to operate, but they’re also quieter, quicker, and cleaner, with no fumes or pollutants. However, they’ve been held back by both the technology and the talent to make them truly competitive with gas alternatives. That’s Arc’s opportunity.

Using modern, aerospace- and automotive-inspired techniques, we’re building our hulls, batteries, cooling systems, firmware, and software together to deliver the next generation of watercraft.

What we’re looking for

We’re seeking a candidate who shares our vision, thrives on challenges, and embraces opportunities to learn and grow. Our team values transparency and operates in a lean, high-trust environment where everyone takes ownership of their work.

As a full-time member of our production team, you will report directly to the Production Supervisor and work from our manufacturing facility in Torrance, CA. Because we are a startup, you can expect a fast-paced, dynamic environment that requires adaptability and a proactive mindset. While the role may evolve with our growth, here are some core responsibilities and qualifications that we anticipate remaining consistent:

Core responsibilities

  • Assembling wiring harnesses, ensuring compliance with IPC/WHMA-A-620 standards.
  • Routing and securing wire harnesses within vehicle assemblies, adhering to engineering documentation.
  • Conducting electrical continuity tests and inspections to identify and resolve issues.
  • Interpreting schematics, blueprints, and work instructions to complete tasks accurately.
  • Collaborating with the production team to implement design changes and improve processes.
  • Maintaining a clean, organized workspace and adhering to safety protocols.
  • Documenting work and ensuring traceability of harness components and assemblies

Basic Qualifications

  • Proficiency in reading and interpreting wiring diagrams and technical schematics.
  • Mechanical aptitude and experience with hand and power tools.
  • Attention to detail and ability to work with precision.
  • Knowledge of proper PPE use and maintaining a safe work environment.
  • High school diploma or equivalent.

Bonus qualifications

  • Experience with both low-voltage and high-voltate electrical systems or wiring harness assembly.
  • Familiarity with IPC/WHMA-A-620 standards for cable and wire harness assemblies.
  • Previous work experience in aerospace, automotive, or electric vehicle industries.
  • Ability to use crimping tools, soldering equipment, and electrical testing instruments.
  • Effective communication skills and the ability to work collaboratively in a team.
  • Comfortable pushing a fast but sustainable pace
  • Enthusiasm for boating and clean energy

At Arc, we encourage diversity and consider all qualified applicants equally for employment, regardless of background, identity, or status. You're welcome to reach out even if you feel you don't meet these qualifications. Passion and aptitude make up for a lot.

What we value

We value these five things above all else:

  • Ownership over both your work and the company’s success
  • Empathy for colleagues and for customers
  • Humility in problem solving and collaboration
  • Pragmatism for navigating ambiguity quickly and sensibly
  • Inclusion of different backgrounds, opinions, cultures, etc.

Given that we work in a sometimes intense or stressful environment, it’s vital that our values align. We’d be happy to elaborate on any or all of these during the interview process.

What you’ll get

  • Talented teammates that challenge you to be better
  • Access and often input to a wide range of business activities
  • An hourly wage between $31.50 and $42 with overtime available
  • Semi-annual bonuses tied to impact
  • A meaningful equity stake
  • An opportunity to have an outsized impact on industry-defining vehicles
  • The ability to drive positive environmental change through your work
  • Nearly free health insurance (we cover 99%) and a 401k
  • Generous parental leave
  • Daily lunches, plenty of snacks, lots of swag, and more
  • Boat rides!

Hope to hear from you soon!

The crew at Arc

Apply for this Job

* Required
resume chosen  
(File types: pdf, doc, docx, txt, rtf)
Cancel
cover_letter chosen  
(File types: pdf, doc, docx, txt, rtf)
Cancel

Voluntary Self-Identification

For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file.

As set forth in Arc Boat Company’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law.

Race & Ethnicity Definitions

If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows:

A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to compensation (or who but for the receipt of military retired pay would be entitled to compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability.

A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service.

An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense.

An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985.

Voluntary Self-Identification of Disability

Form CC-305
Page 1 of 1
OMB Control Number 1250-0005
Expires 04/30/2026

Why are you being asked to complete this form?

We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years.

Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp.

How do you know if you have a disability?

A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to:

  • Alcohol or other substance use disorder (not currently using drugs illegally)
  • Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS
  • Blind or low vision
  • Cancer (past or present)
  • Cardiovascular or heart disease
  • Celiac disease
  • Cerebral palsy
  • Deaf or serious difficulty hearing
  • Diabetes
  • Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders
  • Epilepsy or other seizure disorder
  • Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome
  • Intellectual or developmental disability
  • Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD
  • Missing limbs or partially missing limbs
  • Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports
  • Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS)
  • Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities
  • Partial or complete paralysis (any cause)
  • Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema
  • Short stature (dwarfism)
  • Traumatic brain injury

PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete.

Enter the verification code sent to to confirm you are not a robot, then submit your application.

This application was flagged as potential bot traffic. To resubmit your application, turn off any VPNs, clear the browser's cache and cookies, or try another browser. If you still can't submit it, contact our support team through the help center.